This and many other products are now available for order online and pickup at the Power Equipment Direct warehouse in Bolingbrook, Illinois or at a Ferguson location near you.
Answer:
Your nearest pickup location within a 50-mile radius is automatically selected when you enter the site. To change your pickup location and see availability for other nearby locations, click the "Change Pickup Location" link on the product page or in the cart.
Answer:
Eligible items will have the Local Pickup option available both on the product page and in the cart. Select this option for all items you wish to pick up. Please note that Local Pickup can only be scheduled online at this time.
Answer:
Items are usually ready for pickup the same day the online order is placed, but this will depend on order volume and time of day. When your order is ready, you will receive an email including specific pickup instructions. Make sure to check your junk/spam folder. Orders not picked up within two business days may be canceled. You should opt to have your items shipped if you cannot pick them up promptly.
Answer:
During checkout, you will be prompted to enter the name, mobile phone number, and email address of the person who will be picking up the order. For your protection, only you or your designated pickup party may pick up your order. You will need your order confirmation and a government-issued photo ID to pick up your order.
Answer:
Not all items are available at all locations, so pickup availability will vary based on the selected store. Additionally, some items ship directly from our manufacturer partners and are not available for pickup. You can use the "Change Pickup Location" link to check for availability at nearby Local Pickup locations.
Answer:
Due to packaging, shipping costs, and other factors, some items cannot be shipped and are offered exclusively through Local Pickup.
Answer:
Credit/debit cards, Apple Pay, Google Pay, PayPal, and financing are accepted for Local Pickup orders.
Answer:
Make sure to have your order confirmation and a government-issued photo ID available when picking up your order. Check the item dimensions and ensure the items will fit in your vehicle. Bring any straps and other materials that will be needed to secure the items for transport.
Comfort-Aire 125k BTU Lowboy Oil Furnace Front Flue 83% AFUE
New NewThis product is new and has never been used. It's in its original packaging, which has not been opened.
Weight
250 Pounds 250 PoundsTotal weight of the product and any included accessory/components. This total is not the shipping weight, as it does not include packing material, which may increase the overall shipping weight of this product.
Product Category
Furnace
View More
+Share This Product
Recommended Accessories
Required AccessoriesAdd All Required
Installation Accessories
Features
Features
Overview for Comfort-Aire OLFB125-D5-3A
Featuring 14 gauge steel with high temperature ceramic fiber combustion chambers, Comfort-Aire furnaces heat exchangers are heavy duty and long lasting. With large diameter stainless steel cleanout ports, you can easily gain access for maintenance. The high quality Beckett™ burner provides efficient combustion, consistent operation and smooth ignition. The Beckett™ burner features advanced control including programmable valve-on delay, indicator lights for system monitoring and diagnostics, two communication ports and more.
Product Feature
Foil-faced high density fiberglass insulation to minimize noise and heat loss
Heavy duty 14 gauge steel heat exchanger engineered for efficiency; covered by limited lifetime warranty
Available in upflow, downflow, horizontal, front or rear flue configurations
Corrosion-resistant steel cabinet construction with baked enamel finish for durability
Easy access stainless steel clean-out ports for complete servicing of heat exchanger
State-of-the-art Beckett "AFG" burner with flame retention head, PSC burner motor and solid state ignition for smooth igniting
High temperature ceramic combustion chamber for quiet, high efficiency combustion
Multi-speed direct drive blower assembly with slide-out design and handy plug-in wiring (adjustable belt drive on OLRA200-BH)
Primary with integral fan center
Honeywell fan/limit for simple operation
Specifications
Specifications
Overview
Product Category
Furnace
General Information
Type
Oil Furnace
Product Line
Patriot 80
Product Sub-line
Lowboy
Product Category
Furnace
Fuel Type Fuel TypeTo create heat, some form of fuel is required. Fuel Type specifies what the product uses as an input to create heat.
Oil
Vent Type Vent TypeProducts that use combustion (burning) of fuel to create heat also create potentially dangerous gasses that need to be exhausted (AKA "Vented"). Depending on the product, venting can be done via a chimney, through a side wall, or use a second vent to provide fresh air to the appliance.
Chimney Vent
Modulating/Staging Modulating/StagingStages are unique speeds or levels that equipment can operate at. More stages allow for better fine-tuned control of output, which improves comfort and efficiency. Modulating equipment can operate across a range of levels, giving the highest level of fine-tuned control.
Single Stage
Blower Motor Type
PSC Multi-Speed
Configuration ConfigurationOrientation describes the direction that air will flow through a piece of equipment. (e.g. air will flow horizontally through a "Horizontal" unit heater.) Most equipment will only function properly if installed in the proper orientation.
Upflow
Performance
AFUE AFUEAFUE (Annual Fuel Utilization Efficiency) measures the efficiency of combustion equipment over the entire heating season, and is calculated by dividing the amount of energy that is actually heating your home by the total energy contained in the fuel used by the boiler/furnace.
83 %
Heating BTU
125000
High Fire Input
151000 BTU
High Fire Output
127000 BTU
Low Fire Input
134000 BTU
Low Fire Output
113000 BTU
Maximum Air Flow
2360 CFM
Electrical Data
Phase
1
Frequency
60 Hz
Recommended Breaker Size
15 Amps
Dimensions
Flue Connection Size
6 Inches
Product Height
37 Inches
Product Width
22 1/2 Inches
Product Depth
52 Inches
Product Weight
250 Pounds
Shipping Weight
250 Pounds
Certifications
ETL Listed
Yes
AHRI Certified
Yes
AHRI Reference Number
5261819
Warranty Information
Parts Warranty Parts WarrantyA warranty is a safeguard from defects in manufacturing and can vary in length and terms. Some manufacturers require registration for extended warranty benefits, be sure to check out features and the warranty document. To see the manufacturer's warranty statement, click on the Manuals tab. Learn More
5 Years
Heat Exchanger Warranty
20 Years
Reviews
Reviews
Do You Own This Product?
Give us your opinion on this product and help any future buyer's make an informed decision.
+Thank You For Submitting Your QuestionYour submission has been sent successfully. Please give our product specialists up to two business days to respond.
Continue Shopping
×
Comfort-Aire 125k BTU Lowboy Oil Furnace Front Flue 83% AFUE